Saturday, 21 December 2013

{solved} stuck at boot logo micromax a35

for those who are having stuck at boot logo problem ,
follow these steps 
1.flash recovery to boot partiton

 place boot.img in adb folder 
just like you have flashed recovery 
use this command 

 fastboot flash boot recovery.img

 2.now you will boot in cwm by pressing vol up + power or power 
key
now you need to restore your previous data i mean backup took by cwm,
it should be restored otherwise it wont boot 
if it says md5 checksum mismatch then edit md5 file and make it blank 
now .......restart.......................................................................

3.then press power key you ll boot in cwm 

 4.now flash gopis any base rom 

5.again flash boot.img to boot partition

fastboot flash boot boot.img

6.now start mob normally .
tested by me 100 % working
at

7 comments:

  1. Abhishek22 December 2013 at 05:16

    Where is md5 file

    ReplyDelete
  2. amark5 January 2014 at 22:10

    it says recovery error..plz help

    ReplyDelete
  3. amark5 January 2014 at 22:14

    sir i had install custom rom icsjellyblend after installing sucessfully mobile getting restarted from logo again n again...i have done ur above process but it says recovery error...plz help

    ReplyDelete
  4. amark5 January 2014 at 22:18

    sir i had install custom rom icsjellyblend in micromax a35 after installing sucessfully mobile getting restarted from logo again n again...i have done ur above process but it says recovery error...plz help....also when i press volume up+power button it goes to factory test....plz help

    ReplyDelete
  5. Unknown7 January 2014 at 10:13

    Could u plz provide the boot img for a35

    ReplyDelete
  6. PINAKI14 February 2014 at 23:16

    This comment has been removed by a blog administrator.

    ReplyDelete
  7. PINAKI14 February 2014 at 23:17

    This comment has been removed by a blog administrator.

    ReplyDelete